PCB design ยท Pakistan

PCB Design Services in Pakistan

Schematic capture through fab-ready gerbers, by engineers who take the resulting boards through bring-up, EMC pre-compliance and production themselves. Layout choices are made with the whole product in view - the firmware that will run, the enclosure it sits inside, the chamber it will one day be measured in.

Serving Karachi, Lahore, Islamabad, Faisalabad and export-oriented clients. Australian-registered engineering firm (Incendio Solutions Pty Ltd) delivering to Pakistan-market pricing and export-standard quality. See the Australian practice page for the full technical scope this mirrors.

Engineer soldering components onto a circuit board.
Firmware and board bring-up

Scope

What PCB design covers - and what it doesn't.

PCB design is the discipline of turning a set of electrical constraints into a manufacturable board. We treat it as a system problem: the layer stackup, the return-path plan and the placement decisions upstream of routing set the ceiling on EMC, signal integrity and thermal outcomes downstream.

In scope

  • Schematic capture, symbol and footprint libraries with datasheet verification
  • Multi-layer stackup design (2-16+ layer boards, controlled impedance)
  • High-speed routing (USB 3.x, gigabit Ethernet, DDR3/4, MIPI, PCIe)
  • RF/wireless layout for sub-GHz, 2.4/5 GHz and cellular front-ends
  • Power integrity: multi-rail power trees, decoupling, thermal relief
  • EMC-aware layout: stackups, return paths, filtering, guard bands
  • DFM for Australian and offshore fabs and assemblers
  • Prototype build coordination, first-article inspection, respin support

Honestly out of scope

  • Board fabrication itself - we design for fabs, we are not one
  • One-off hand-solder assembly (we specify test fixtures, not build them)
  • Custom ASIC or FPGA-first designs (we work around proven silicon)
  • Component sourcing brokerage (we spec parts, you or your CM procure)

Pricing (Pakistan)

Pakistan-market rates, Australian engineering standard.

PKR 150k-500k for simple 2-layer designs; PKR 700k-2.5M for 4-6 layer mixed-signal boards; PKR 2M-6M+ for complex high-speed or RF work. USD-denominated pricing for export clients matches the AUD structure at PKR-adjusted rates.

All programs begin with a paid discovery week (typically PKR 100k-300k depending on scope) producing a written architecture, budget range and named risks - the same discovery output the Australian side delivers, tailored for Pakistan-market context.

FAQ (Pakistan)

PCB Design Services in Pakistan - straight answers.

PKR 150k-500k for simple 2-layer designs; PKR 700k-2.5M for 4-6 layer mixed-signal boards; PKR 2M-6M+ for complex high-speed or RF work. USD-denominated pricing for export clients matches the AUD structure at PKR-adjusted rates.
Not currently. We are an Australian-registered engineering studio (Incendio Solutions Pty Ltd, Melbourne) serving Pakistani manufacturers, startups and export-oriented clients remotely and via periodic travel. The engineering standard, IP-transfer terms and contract law are Australian; the pricing is set for the Pakistan market. If a real Pakistan entity is required for your procurement process, we will say so.
Local manufacturers modernising their operations, technology startups building for domestic and export markets, and export-services teams delivering to overseas clients under our engineering standard. We are honest about not being an on-site team; the model is remote-first with scheduled travel when it materially improves the program.
PKR-denominated invoicing for Pakistan-domiciled clients through licensed remittance channels; USD-denominated invoicing for export-oriented engagements where the client is billing in USD themselves. All invoicing complies with SBP requirements.
PSQCA for domestic Pakistan-market products; CE and FCC for export markets we design towards. We work with Pakistan-based test-house partners for local certification runs where needed.
Yes, where the client wants a hybrid delivery model - our Australian team owns architecture and quality, Pakistan-based partners handle specific delivery streams. We disclose the split up-front and stay accountable for the whole program regardless of who executes each part.

Contact

Tell us about your Pakistan-based program.

We reply within one business day, Melbourne time (roughly 3 hours ahead of Karachi in most of the year). Discovery weeks can be quoted in PKR or USD.

Start a project See Australian practice page